The next step in our IronPly® soffit plant stand project is to paint the grooves in each panel with black paint to give depth and detail to the plant stand. Once dry, stain is applied to each panel. We chose a darker stain, but any color would work depending on the desired look. Next, strips […]
Stylish plant stands are always a decorative way to showcase greenery and florals around the home or office. For a modern and sleek design, we used IronPly® Patriot Primed® Soffit panels to construct tall plant stands to flank the front door creating a welcoming entrance. If IronPly® Soffit is not available in your area, IronPly® […]
After measuring twice and cutting out the desired shapes, sand the edges to remove rough spots and splintering. Using a drill, a small hole is added to one end. Two coats of silver or gold paint were applied to our tags. Once dry, the tags are ready for personalizing and decorating. We kept our design […]
A fun and unique way to dress up a dinner party is by creating place tags using RevolutionPly® plywood. There are a number of shapes and sizes that can be used as well as endless design possibilities to accent your festive event. We designed our name tags to highlight each place setting at a holiday […]
Create a sleek modern flower box using IronPly® Soffit panels. These are beautiful accents to a front porch, entry hall, or flanking a front door to show off seasonal flowers and plants. See below the list of materials needed to complete this project: IronPly® Soffit 2” x 2” Pine pieces Wood glue Screws Table or […]
In completion of our headboard using RevolutionPly® and RevBead®, the final steps are sanding and painting. Before you begin painting, make sure all sanding dust is removed and you are working with a clean surface. Two coats of paint were applied on the headboard to give it a smooth, polished appearance. We chose to use […]
Now that the main section of our headboard using RevolutionPly® and RevBead® is complete, the next step is to cut the trim pieces to both frame the headboard and provide footing to enable it to stand. We again used RevolutionPly® plywood for the trim pieces to complete the design of the headboard. Using both wood […]
The next step in constructing the headboard using RevolutionPly® plywood and RevBead® Reversible Beadboard is to cut out the spaces in the headboard to insert the RevBead® pieces. The RevBead® is then measured and cut to the size of the openings in the headboard. A router is used to outline the openings to provide a […]
Building your own furniture can be easier than you think, and it’s very rewarding having constructed something with your own hands and creativity. Over the next few segments, we will show you how easy it is to construct a headboard using RevolutionPly® plywood and RevBead® Reversible Beadboard. The headboard we are constructing is for a […]
The final steps in completing our 3-D picture frame using cabinet grade and RevolutionPly® plywood are assembling the painted components and adding our photographs. The small square piece of wood that was already attached to the backside of the top component (in Part II), is now attached to the bottom component using heavy duty staples […]