Archive for the ‘IronPly® Soffit’ Category

IronPly® Soffit Plant Stand – Part IV

Wednesday, August 28th, 2019

The final steps in completing our IronPly® soffit plant stand are to add the floor and shelf pieces, and then fill our stand with a beautiful plant. Using the 3/4″ exterior panel pieces, the size of the needed floor piece and shelf were measured and cut.  Holes are drilled in the center of the pieces […]

IronPly® Soffit Plant Stand – Part III

Wednesday, August 14th, 2019

To assemble the four side pieces of our IronPly® soffit plant stand, wood glue is applied to the edge of each piece.  The pieces are then stapled or nailed in place to form the box shape of the plant stand. Next, polyurethane is applied to the plant stand to provide a sleek, polished look.  Once […]

IronPly® Soffit Plant Stand – Part II

Tuesday, July 30th, 2019

The next step in our IronPly® soffit plant stand project is to paint the grooves in each panel with black paint to give depth and detail to the plant stand.  Once dry, stain is applied to each panel.  We chose a darker stain, but any color would work depending on the desired look. Next, strips […]

IronPly® Soffit Plant Stand – Part I

Wednesday, July 17th, 2019

Stylish plant stands are always a decorative way to showcase greenery and florals around the home or office.  For a modern and sleek design, we used IronPly® Patriot Primed® Soffit panels to construct tall plant stands to flank the front door creating a welcoming entrance.  If IronPly® Soffit is not available in your area, IronPly® […]

IronPly® Soffit Flower Box – Part I

Friday, September 14th, 2018

Create a sleek modern flower box using IronPly® Soffit panels.  These are beautiful accents to a front porch, entry hall, or flanking a front door to show off seasonal flowers and plants. See below the list of materials needed to complete this project: IronPly® Soffit 2” x 2” Pine pieces Wood glue Screws Table or […]

NAFCD + NBMDA 2016 Annual Convention

Wednesday, November 2nd, 2016

NAFCD (North American Association of Floor Covering Distribution) and NBMDA (North American Building Material Distribution Association) hosts the 2016 Annual Convention November 1 – 3 at the Hyatt Regency in Chicago, IL. This convention brings together top manufacturers and distributors to take part in education sessions, share information, learn about trends, and establish new relationships. […]

2016 NAWLA Traders Market is Here!

Wednesday, October 19th, 2016

Patriot Timber Products is a proud member of the North American Wholesale Lumber Association (NAWLA). We have a booth at the NAWLA Traders Market next week – October 26-28 at The Mirage in Las Vegas, NV. Stop by and see us at Booth #306 to learn more about our complete line of panel products including RevolutionPly® […]

The International Surface Event 2016

Friday, January 8th, 2016

  Patriot Timber Products will be exhibiting again this year at The International Surface Event 2016. Commonly referred to as just SURFACES; the show will be in Las Vegas, Nevada this year from January 20 – 22 at the Mandalay Bay Convention Center. Our booth number is 4043.   SURFACES is the leading floor covering, […]

2015 NAWLA Traders Market is Here!

Wednesday, November 4th, 2015

Patriot Timber Products is a proud member of the North American Wholesale Lumber Association (NAWLA).  We have a booth at the NAWLA Traders Market this week – November 4-6 at the Hilton Anatole, TX.  Stop by and see us at Booth #161 to learn more about our complete line of panel products including SurePly® Premium […]

Dog House Project: Part 5

Friday, February 13th, 2015

Patriot Timber’s hope is that by sharing the dog house project, we succeeded in demonstrating how easy it is and have inspired you to take precautions for protecting your beloved pets during these blustery winter months. The project was a huge success and the donation was very much appreciated by the folks at the SPCA. […]

Back to Blog