IronPly® Soffit Flower Box – Part I

September 14th, 2018

Create a sleek modern flower box using IronPly® Soffit panels.  These are beautiful accents to a front porch, entry hall, or flanking a front door to show off seasonal flowers and plants.

See below the list of materials needed to complete this project:

  • IronPly® Soffit
  • 2” x 2” Pine pieces
  • Wood glue
  • Screws
  • Table or band saw
  • 1” x 3” pine trim
  • Block sander or sand paper
  • Drill
  • Stain or paint
  • Brushes

After deciding on the desired size of your flower box, measure twice to ensure accurate cuts.  Use a block sander or a piece of sand paper to lightly sand off any rough edges from all pieces before beginning assembly.

See attached photos and check back to see the next steps in completing our IronPly® Soffit flower box.

For more information on Patriot Timber Products IronPly® Soffit, please visit www.IronPlySoffit.com or for more information on the entire line of Patriot Timber Family of Panel Products, visit www.Patriottimber.com.

 

Tags: , , ,

Back to Blog

Leave a Reply