Posts Tagged ‘patriot primed’

IronPly® Soffit Plant Stand – Part III

Wednesday, August 14th, 2019

To assemble the four side pieces of our IronPly® soffit plant stand, wood glue is applied to the edge of each piece.  The pieces are then stapled or nailed in place to form the box shape of the plant stand. Next, polyurethane is applied to the plant stand to provide a sleek, polished look.  Once […]

IronPly® Soffit Plant Stand – Part II

Tuesday, July 30th, 2019

The next step in our IronPly® soffit plant stand project is to paint the grooves in each panel with black paint to give depth and detail to the plant stand.  Once dry, stain is applied to each panel.  We chose a darker stain, but any color would work depending on the desired look. Next, strips […]

IronPly® Soffit Plant Stand – Part I

Wednesday, July 17th, 2019

Stylish plant stands are always a decorative way to showcase greenery and florals around the home or office.  For a modern and sleek design, we used IronPly® Patriot Primed® Soffit panels to construct tall plant stands to flank the front door creating a welcoming entrance.  If IronPly® Soffit is not available in your area, IronPly® […]

RevolutionPly® Place Tags – Part I

Thursday, February 7th, 2019

A fun and unique way to dress up a dinner party is by creating place tags using RevolutionPly® plywood.  There are a number of shapes and sizes that can be used as well as endless design possibilities to accent your festive event. We designed our name tags to highlight each place setting at a holiday […]

Patriotic Clip Frame – Part II

Tuesday, July 3rd, 2018

In continuation of our patriotic clip frame project celebrating the Independence Day holiday, the next steps are sanding, applying lettering, attaching twine, and hanging the photos for display. The edges of the painted board are sanded to round the corners and to give it a slightly worn look.  Letters and stars are cut out using […]

Patriotic Clip Frame – Part I

Friday, June 22nd, 2018

In celebration of the July 4th holiday, we are constructing a patriotic clip frame using 1/2″ blondewood plywood. Supply list: 1/2” blondewood Hand held saw or table saw Block sander Masking tape Paint Paint brushes Twine Decorative upholstery tacks Small clothes pins Cricut or stencil patterns Wall hanging supplies To begin this project, the blondewood […]

RevolutionPly® and RevBead® Queen Headboard – Part IV

Thursday, June 14th, 2018

In completion of our headboard using RevolutionPly® and RevBead®, the final steps are sanding and painting.  Before you begin painting, make sure all sanding dust is removed and you are working with a clean surface. Two coats of paint were applied on the headboard to give it a smooth, polished appearance.   We chose to use […]

RevolutionPly® and RevBead® Queen Headboard – Part III

Friday, May 11th, 2018

Now that the main section of our headboard using RevolutionPly® and RevBead® is complete, the next step is to cut the trim pieces to both frame the headboard and provide footing to enable it to stand.  We again used RevolutionPly® plywood for the trim pieces to complete the design of the headboard.  Using both wood […]

RevolutionPly® and RevBead® Queen Headboard – Part I

Friday, April 27th, 2018

Building your own furniture can be easier than you think, and it’s very rewarding having constructed something with your own hands and creativity.  Over the next few segments, we will show you how easy it is to construct a headboard using RevolutionPly® plywood and RevBead® Reversible Beadboard.  The headboard we are constructing is for a […]

3-D Picture Frame – Part IV

Friday, April 20th, 2018

The final steps in completing our 3-D picture frame using cabinet grade and RevolutionPly® plywood are assembling the painted components and adding our photographs. The small square piece of wood that was already attached to the backside of the top component (in Part II), is now attached to the bottom component using heavy duty staples […]

Back to Blog