Stylish plant stands are always a decorative way to showcase greenery and florals around the home or office. For a modern and sleek design, we used IronPly® Patriot Primed® Soffit panels to construct tall plant stands to flank the front door creating a welcoming entrance. If IronPly® Soffit is not available in your area, IronPly® […]
A fun and unique way to dress up a dinner party is by creating place tags using RevolutionPly® plywood. There are a number of shapes and sizes that can be used as well as endless design possibilities to accent your festive event. We designed our name tags to highlight each place setting at a holiday […]
In continuation of our patriotic clip frame project celebrating the Independence Day holiday, the next steps are sanding, applying lettering, attaching twine, and hanging the photos for display. The edges of the painted board are sanded to round the corners and to give it a slightly worn look. Letters and stars are cut out using […]
In celebration of the July 4th holiday, we are constructing a patriotic clip frame using 1/2″ blondewood plywood. Supply list: 1/2” blondewood Hand held saw or table saw Block sander Masking tape Paint Paint brushes Twine Decorative upholstery tacks Small clothes pins Cricut or stencil patterns Wall hanging supplies To begin this project, the blondewood […]
In completion of our headboard using RevolutionPly® and RevBead®, the final steps are sanding and painting. Before you begin painting, make sure all sanding dust is removed and you are working with a clean surface. Two coats of paint were applied on the headboard to give it a smooth, polished appearance. We chose to use […]
Now that the main section of our headboard using RevolutionPly® and RevBead® is complete, the next step is to cut the trim pieces to both frame the headboard and provide footing to enable it to stand. We again used RevolutionPly® plywood for the trim pieces to complete the design of the headboard. Using both wood […]
Building your own furniture can be easier than you think, and it’s very rewarding having constructed something with your own hands and creativity. Over the next few segments, we will show you how easy it is to construct a headboard using RevolutionPly® plywood and RevBead® Reversible Beadboard. The headboard we are constructing is for a […]
The final steps in completing our 3-D picture frame using cabinet grade and RevolutionPly® plywood are assembling the painted components and adding our photographs. The small square piece of wood that was already attached to the backside of the top component (in Part II), is now attached to the bottom component using heavy duty staples […]
The next steps in completing the 3-D picture frame using cabinet grade and RevolutionPly® plywood are painting and preparing the frame for assembly. We chose two shades of gray paint for our frame. A light gray is used for the top component and a slightly darker shade is used for the bottom component. The color […]
In continuation of our project to create a 3-D picture frame using cabinet grade and RevolutionPly® plywood, all pieces have been cut out and lightly sanded to remove any splinters. The next step is to use the router with a 1/2″ bit to outline each space that will hold a photograph, therefore making the openings […]