Posts Tagged ‘revolutionply’

THE INTERNATIONAL SURFACE EVENT 2020

Friday, January 24th, 2020

Patriot Timber Products will be exhibiting again this year at The International Surface Event (TISE) 2020.  The show will be in Las Vegas, Nevada from January 28th – 30th at the Mandalay Bay Convention Center.  The International Surface Event consists of three world-class tradeshows – SURFACES / StonExpo/Marmomac / and Tile Expo.  This combined event […]

RevolutionPly® Monogram Boxes – Part II

Tuesday, January 21st, 2020

We measured and cut the pieces needed to make our RevolutionPly® monogram boxes.  After lightly sanding the edges to remove any splinters, the pieces were glued and then nailed together to form a shadow box. Stain was applied to the outside of the boxes and removed with a soft cloth.  Once dry, the edges were […]

RevolutionPly® Holiday Sign & Presents Display – Part II

Monday, December 23rd, 2019

In continuation of the RevolutionPly® Holiday Sign & Presents Display project, the final steps are to decorate the pieces to complete our holiday display. For the holiday sign, we chose to paint it red.  After the second coat was completely dry, we then lightly sanded and added a medium stain, wiping it off immediately just […]

RevolutionPly® Holiday Sign & Presents Display – Part I

Tuesday, December 17th, 2019

Decorating your front porch or entryway for the holidays is easier than you think.  All it takes are a few supplies and a little imagination.  We created a festive display using RevolutionPly® plywood, a superior alternative to lauan or meranti. To get started on this project, see the following list of supplies:             18mm RevolutionPly® […]

RevolutionPly® Monogram Boxes – Part I

Monday, December 9th, 2019

With the holiday season comes festivities that include friends and family gatherings.  A unique idea to mark dinner place settings, or to be given as party favors is a monogram box for each individual guest. To create these boxes, we are using RevolutionPly® plywood, a superior alternative to lauan or meranti.  With just a little […]

RevolutionPly® Place Tags – Part II

Thursday, June 27th, 2019

After measuring twice and cutting out the desired shapes, sand the edges to remove rough spots and splintering. Using a drill, a small hole is added to one end. Two coats of silver or gold paint were applied to our tags. Once dry, the tags are ready for personalizing and decorating. We kept our design […]

RevolutionPly® Place Tags – Part I

Thursday, February 7th, 2019

A fun and unique way to dress up a dinner party is by creating place tags using RevolutionPly® plywood.  There are a number of shapes and sizes that can be used as well as endless design possibilities to accent your festive event. We designed our name tags to highlight each place setting at a holiday […]

RevolutionPly® and RevBead® Queen Headboard – Part IV

Thursday, June 14th, 2018

In completion of our headboard using RevolutionPly® and RevBead®, the final steps are sanding and painting.  Before you begin painting, make sure all sanding dust is removed and you are working with a clean surface. Two coats of paint were applied on the headboard to give it a smooth, polished appearance.   We chose to use […]

RevolutionPly® and RevBead® Queen Headboard – Part III

Friday, May 11th, 2018

Now that the main section of our headboard using RevolutionPly® and RevBead® is complete, the next step is to cut the trim pieces to both frame the headboard and provide footing to enable it to stand.  We again used RevolutionPly® plywood for the trim pieces to complete the design of the headboard.  Using both wood […]

RevolutionPly® and RevBead® Queen Headboard – Part II

Friday, May 4th, 2018

The next step in constructing the headboard using RevolutionPly® plywood and RevBead® Reversible Beadboard is to cut out the spaces in the headboard to insert the RevBead® pieces. The RevBead® is then measured and cut to the size of the openings in the headboard.  A router is used to outline the openings to provide a […]

Back to Blog