IronPly® Soffit Plant Stand – Part I

July 17th, 2019

Stylish plant stands are always a decorative way to showcase greenery and florals around the home or office.  For a modern and sleek design, we used IronPly® Patriot Primed® Soffit panels to construct tall plant stands to flank the front door creating a welcoming entrance.  If IronPly® Soffit is not available in your area, IronPly® or SurePly® may also be used for this project.

To get started, you will need the following supplies:

IronPly® Soffit                                                Table saw

3 – 2” x 2” x 8’ treated lumber                      Straight edge

¾” – 1” exterior panels (base)                       Clamps

Wood glue                                                       Measuring tape

¾” Staples or finishing nails                          Pencil

Cordless nail/staple gun                                 Exterior stain

8 – 1 ½” – 2” exterior screws                         Exterior paint

Drill bits                                                          Polyurethane

Cordless drill                                                  Paint brushes

Circular saw                                                   Paint sponges

Remembering to measure twice and cut once, IronPly® Soffit is cut into 4 tapered panels to create the desired shape of our plant stand.  Next, using a table saw, grooves are cut in measured segments along the panel for a modern detail.

See pictures below and check back to see the next steps in our IronPly® Soffit plant stand project.

For more information on the entire line of Patriot Timber Family of Panel Products, visit

Tags: , , , , ,

Back to Blog

Leave a Reply