Archive for December, 2016

Star Place Holders

Thursday, December 29th, 2016

A crafty idea for making place holders for your holiday party is to cut and paint star shapes out of RevBead® plywood beadboard.  You will need a piece of RevBead® plywood beadboard, jigsaw, drill, star shape template, sand paper or block sander, craft paint, paint pen, and twine. Trace and cut the star shapes and […]

Birch Plywood Table Box – Part III

Tuesday, December 20th, 2016

To complete the birch plywood table box, wood glue was applied to the edge of each piece and then finishing nails were used to assemble them into the shape of our finished box.  We then filled our box with fresh fir tree trimmings, white lights and red balls and stars in celebration of a holiday […]

Birch Plywood Table Box – Part II

Thursday, December 8th, 2016

Our birch plywood table box is coming along nicely, as we have been working on our pieces to give them a distressed look.  An easy way to do this is to use a hammer to tap the edges of the pieces and then place the pieces on top of some nails or screws on the […]

Birch Plywood Table Box – Part I

Thursday, December 1st, 2016

A great idea for decorating a table for the holidays is to construct a centerpiece box to hold your choice of festive items.  Supplies needed to complete this project are a piece of birch plywood, a saw, measuring tape, block sander or sand paper, wood glue, finishing nails and wood stain. To build our box, […]

Back to Blog