3-D Picture Frame – Part I
March 29th, 2018
A great way to display photographs is in a beautiful 3-D frame constructed from cabinet grade plywood and RevolutionPly®. Below is a list of materials needed to complete this fun project.
We began by measuring and tracing the dimensions of our frame onto a piece of 1/2″ cabinet grade plywood. This thickness makes a sturdy frame, but yet it’s not too heavy to handle or hang on the wall. Once the pattern is established, the pieces are cut to begin assembly.
See pictures below of the initial steps and check back to see progress on our cabinet grade and RevolutionPly® plywood 3-D frame.
- 12mm (1/2”) cabinet grade plywood
- 1/4″ RevolutionPly® plywood
- Optix acrylic sheet
- Photograph fasteners
- Table saw
- Handheld router
- 3/8” x 1/2″ rabbet bit
- Paint or Stain
- Paint brushes
For more information on Patriot Timber Products RevolutionPly® plywood, please visit www.RevolutionPly.com or for more information on the entire line of Patriot Timber Family of Panel Products, visit www.Patriottimber.com.